Wharfedale Diamond 220 Speaker System Review Test Bench

Test Bench

Diamond 220 (purple) +1.44/–4.56 dB, 200 Hz to 10 kHz; –3 dB @ 99 Hz, –6 dB @ 76 Hz; impedance minimum 4.35 ohms @ 224 Hz, phase angle –35.10º @ 120 Hz; sensitivity 87 dB, 500 Hz to 2 kHz.

Diamond 220C (green) +2.71/–3.73 dB, 200 Hz to 10 kHz; –3 dB @ 83 Hz, –6 dB @ 70 Hz; impedance minimum 4.26 ohms @ 213 Hz, phase angle –43.44º @ 3.6 kHz; sensitivity 87 dB, 500 Hz to 2 kHz.

WH-D10 (blue) Close-miked response, normalized to level @ 80 Hz: lower –3 dB @ 37 Hz, –6 dB @ 34 Hz, upper –3 dB @ 553 Hz using LFE input.—MJP

COMPANY INFO
Wharfedale USA
(312) 738-5025
ARTICLE CONTENTS

COMMENTS
allanmarcus's picture

So, how are these compared to the Elac Debut line?

Mark Fleischmann's picture
...to try anything from Elac at home.
Ash's picture

Hi,

Were any THD measurements done for the D10 sub ? It seems to have a quite wide FR for a sub and I am wondering if it can be used also as a mid bass module ( not just a sub) for a small bookshelf, upto say 200-250Hz ..
Thats only if there are no THD concerns upto that freq.

Thanks !!!

X