Revel PerformaBe Surround Speaker System Review Test Bench

Test Bench

The in-room measurements presented here were made using the Omnimic measurement system from Parts Express. The microphone was positioned at ear height and the speakers (and subwoofers) set up as described in the review. Measurements are for the left channel only and were 1/6th octave smoothed. The microphone was positioned for a single reading at ear-height in the listening chair. Prior experience has indicated that for my room and setup, multiple positioning averaging rarely does more than smooth out small ripples in the response curves.—TJN

720revel.Fig.1

Fig.1 F226Be, no subwoofers. Red: pre-pro Bass control flat. Blue: pre-pro Bass control at -6dB.

720revel.2

Fig.2 F226Be with two B110V2 subwoofers. Red: pre-pro Bass control flat. Blue: pre-pro Bass control at -6dB.

720revel.Fig.3

Fig.3 F226Be with two Revel B110V2 subwoofers in red (Extended mode off) and two SVS SB-3000 subs, in the same locations, in blue. Pre-pro Bass control at -6. Each set of subs were optimized using their on-board parametric equalization.

COMPANY INFO
Revel
(818) 895-3311
ARTICLE CONTENTS

X