Digital Projection M-Vision Cine LED DLP Projector Settings

Settings
Keep in mind that unit-to-unit variations, viewing environment, source, and screen (in the case of front projectors) might render the settings I used less than optimum on some samples of this display. On the other hand, some parameters should be set to the same values presented here regardless of these factors. In the following list, the parameters that can be set with confidence to the specified values have no asterisk.

Parameters flagged with a single asterisk are likely to require different settings than mine. I encourage you to acquire a display-setup disc such as Digital Video Essentials: HD Basics or HD Benchmark on Blu-ray or any of the several setup DVDs available and use it to set these controls yourself.

Parameters flagged with a double asterisk are also likely to require different settings than mine, but they should be adjusted only by a qualified technician with the skill and equipment to do the job correctly.

Thanks to Joel Silver, president of the Imaging Science Foundation, for suggesting that I identify the picture controls in this manner.

Main Menu
Aspect Ratio: Native
*Brightness: 104
*Contrast: 65
Saturation: N/A via HDMI
Hue: N/A via HDMI
Sharpness: 75
Noise Reduction: 30
Overscan: Off

Advanced Menu
Color Space: Auto
Video Standard: N/A via HDMI
Gamma: Film
Color Temperature: 6500K
Color Gamut: REC709
BrilliantColor: On
DynamicBlack: Max
Adaptive Contrast: Off
RGB Adjust

  • **Red Offset: 100
  • **Green Offset: 100
  • **Blue Offset: 104
  • **Red Gain: 116
  • **Green Gain: 100
  • **Blue Gain: 101
Fine Sync
  • V Position: 100
  • H Position: 100

X