AV Receiver Reviews

Five channels driven continuously into 8-ohm loads:
0.1% distortion at 91.2 watts
1% distortion at 112.1 watts

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 74.6 watts
1% distortion at 89.6 watts

Analog frequency response in Pure Direct mode:
–0.15 dB at 10 Hz
–0.04 dB at 20 Hz
–0.13 dB at 20 kHz
–3.21 dB at 50 kHz

Analog frequency response with stereo signal processing:
–0.55 dB at 10 Hz
–0.17 dB at 20 Hz
–0.29 dB at 20 kHz
–18.35 dB at 50 kHz

This graph shows that the SR7005’s left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 121.5 watts and 1 percent distortion at 139.5 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 200.1 watts and 1 percent distortion at 222.6 watts.

Response from the multichannel input to the speaker output measures –0.15 decibels at 10 hertz, –0.04 dB at 20 Hz, –0.14 dB at 20 kilohertz, and –3.28 dB at 50 kHz. THD+N from the CD input to the speaker output was less than 0.016 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –77.20 dB left to right and –76.63 dB right to left. The signal-to-noise ratio with an 8-ohm load from 10 Hz to 24 kHz with “A” weighting was –98.00 dBrA.

From the Dolby Digital input to the loudspeaker output, the left channel measures –0.09 dB at 20 Hz and –0.34 dB at 20 kHz. The center channel measures –0.10 dB at 20 Hz and –0.27 dB at 20 kHz, and the left surround channel measures –0.09 dB at 20 Hz and –0.37 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is –0.01 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 118 Hz and the upper 6-dB down point at 121 Hz.—MJP