Dynaudio Focus 110 Speaker System & Denon AVR-4806CI A/V Receiver HT Labs Measures: Denon AVR-4806CI A/V Receiver

HT Labs Measures: Denon AVR-4806CI A/V Receiver

907Dynaudio.7.jpg

Five channels driven continuously into 8-ohm loads:
0.1% distortion at 137.1 watts
1% distortion at 166.1 watts

All channels driven continuously into 8-ohm loads:
0.1% distortion at 65.7 watts
1% distortion at 66.0 watts

Analog frequency response in Pure Direct mode:
–0.19 dB at 10 Hz; –0.05 dB at 20 Hz
–0.08 dB at 20 kHz; –0.52 dB at 50 kHz

Analog frequency response with signal processing:
–0.52 dB at 10 Hz; –0.15 dB at 20 Hz
–0.09 dB at 20 kHz; –24.58 dB at 50 kHz

This graph shows that the AVR-4806CI's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 188.1 watts and 1 percent distortion at 210.3 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 277.6 watts and 1 percent distortion at 352.0 watts.

Response from the multichannel input to the speaker output measures –0.26 dB at 10 Hz, –0.09 dB at 20 Hz, –0.09 dB at 20 kHz, and –0.53 dB at 50 kHz. THD+N from the amplifier was less than 0.008 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –89.65 dB left to right and –87.92 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –103.18 dBrA.

From the Dolby Digital input to the loudspeaker output, the left channel measures –0.06 dB at 20 Hz and –0.14 dB at 20 kHz. The center channel measures –0.05 dB at 20 Hz and –0.07 dB at 20 kHz, and the left surround channel measures –0.06 dB at 20 Hz and –0.17 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is –0.00 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 118 Hz and the upper 6-dB down point at 121 Hz.—MJP

X