Runco QuantumColor Q-650i LED-DLP Projector Settings


Aspect Ratio: 16:9
Memory: User 1
Brightness: 102
Contrast: 60
Color: N/A
Tint: N/A
Sharpness: 0
Noise Reduction: 0
Overscan: Off

Color Space: Auto
Video Standard: N/A
Gamma: 2.2 or 2.35
Color Temperature: N/A (PCE)
DLP Frame Rate: Auto
Color Gamut: PCE
ContstantContrast: Medium
Adaptive Contrast: Off
RGB Adjust:
Offset: Red 108, Green 104, Blue 99
Gain: Red 103, Green 97, Blue 119

Red 126
Yellow 85
Green 35
Cyan 48
Blue 85
Magenta 49

Red 96
Yellow 93
Green 95
Cyan 35
Blue 97
Magenta 81

Red 58
Yellow 96
Green 87
Cyan 92
Blue 75
Magenta 77

RSC: Off
White Balance (PCE)
Gain: Red 100, Green 99, Blue 78

Unit-to-unit sample variations, the viewing environment, and the source might render these recommendations less than optimum. They are provided only as a potentially useful starting place.

The settings here that are most likely to translate reliably from one sample to another are those involving specific features with only a few setting options, such as Color Space, Gamma, and Noise Reduction. The ones most likely to be subject to sample variations are video controls offering a wide range of settings. This will be particularly true for color temperature (grayscale) and color-management adjustments (where available).

While experimenting with the user-menu controls can do no damage and can easily be reset, we do not provide settings for service-menu adjustments, where available. Random alterations of such controls without detailed knowledge of what they do may corrupt a set's firmware. This will likely require extensive, in-shop repairs that are not covered under the warranty.

We strongly recommend that you find the optimum basic video settings for your sample by using one of the many display-setup DVDs that are available, such as Digital Video Essentials (DVD) or DVE: HD Basics (Blu-ray). A full calibration, particularly of the gray scale and color gamut, is best left to a trained and properly equipped technician such as those certified by the Imaging Science Foundation (ISF) or THX.

(800) 237-8626

Thick Shaddy's picture

Light Output CSMS Specifications: Home Theater Calibration: 400 ANSI Lumens; 14.5 Foot-Lamberts (fL); 540 ANSI Lumens; Light output will drop less than 10% over the life of the product.

During your review did you feel there was not enough light?

Now I see why you went with the small screen.

Thanks for the review!

kevon27's picture

With day and age, you're tell me, no one can make a projector with a powerful bulb that can be used on say a 200" screen and cost below $2000?