Onkyo TX-RZ1100 A/V Receiver Review Specs

Power Output: 140 watts (8 ohms, 2 channels driven)
Auto Setup/Room EQ: Proprietary (AccuEQ)
Video Processing: Scales 1080p (only) to 4K/60, transcodes analog video to HDMI, 4K, HDR-ready passthrough via HDMI
Dimensions (WxHxD, Inches): 17.15 x 8 x 17.75
Weight (Pounds): 43
Video Inputs: HDMI ver. 2.0b (8, 1 front panel), component video (2), composite video (2)
Audio Inputs: Coaxial digital (3), optical digital (2), analog line-level stereo (6), phono (1)
Additional: RJ-45 Ethernet, USB (fixed media only), 12-volt trigger, IR in, RS-232
Video Outputs: HDMI ver. 2.0b (2, 1 second zone-capable), component video (1)
Audio Outputs: 11.2-channel pre-out; Zone 2, 3 line-stereo; ¼ in headphone (front panel)

Company Info
(800) 229-1687

(800) 229-1687

badboy07's picture

...it must be a Pioneer Elite.

charlibilson's picture
mhdaniels31's picture

at over 43 lbs this supposed 140wattx2 (125watts in reality ) weighs 10 lbs heavier then an sc95 and puts out less power is there a brick hidden inside and you'ld think if they were going to use the d3 amps maybe they should have used the EQ as well it would have made more sense then developing something that took everybody else years to do before they got it right

Decibel's picture

Good review. I recently got the TX RZ810 and whole heartedly agree with your review. The sonic signature you describe is exactly what I hear with the 810. I've had a whole slew of amps and receivers and this one is unique. Detailed, powerful, and clear. Yes clear. For some reason this amp just sounds clear. The measurements for the 1100 show a 1 db high frequency boost which I seem to hear in the 810 as well I wouldn't describe this amp as bright, but it does lean to that side ever so slightly. Great amp the 810 and probably gonna buy the 1100 for my other place. Sounds awesome. Running the 810 on Klipsch RP 260, RP 250 and RP 440C btw. Good movie set up and reasonably priced.

drny's picture

Sadly the A/V receiver will soon become a specialty niche product, just as separate components are now (pre-amp/processor and Amplifiers).
That is to say only dedicated videophiles will be on the market for them.
A decent desktop in the near future will be able to do all the processing that a good A/V does now. It is the Amplifier that will continue to live in some new iteration as part of any A/V system.
A/V receivers are simply highly over priced considering that good speakers and source players are affordable in comparison.

PeterC's picture

I recently purchased the Integra DRC-R1 Pre/Pro which is also an Onkyo product.
Am very happy with the sound but It has the same very poor online manual. I have contacted Integra to find out if there is a more complete manual available. They say that there isn't one.
The remote is also very basic for this level of product and is not backlit.
Very frustrating!

dommyluc's picture

This review belongs in the "Electronics/AV Receivers" section, not in the "Displays/4K Ultra HD TV" section of the reviews. I actually had to find this review on Google because it isn't listed in the proper section.