InFocus ScreenPlay 7200 DLP projector Specifications

Specifications

ScreenPlay 7200 1280x720, 16:9 DLP projector
Video inputs: 2 component (Y-Pr-Pb, RCA), component (D5), 2 S-video, composite (RCA), DVI/HDCP (M1-DA), HD-15 (RGB, component)
DMD chip: Texas Instruments HD2
Lens: f1.9, 26.7–36.8mm focal length
Lamp: UHP at 200W (3000 hours) or 250W (2000 hours)
Color wheel: proprietary auto-calibrating, 6-segment, 5x
Contrast ratio: 1400:1 full on/full off
Light output: 1000 ANSI lumens (optimized for video)
Mounting options: front, rear, ceiling
Focusing distance: minimum 5
Throw ratio: 1.49–2.08:1 (distance:width)
Dimensions: 9"x 3.5" x 13" (WxHxD)
Weight: 9.3 lbs.
Warranty: 2 years parts & labor, 1 year on accessories, 90 days/500 hours on lamp
Price: $9999

Manufacturer
InFocus Corporation
27700B SW Parkway Avenue
Wilsonville, OR 97070-9215
tel. (503) 685-6400
fax (503) 685-8887
www.InFocus.com

COMMENTS
bagppe's picture

The InFocus Screenplay 7200 is a front or rear projector that can be installed on the ceiling or put on a tabletop and utilized quickly and easily. The InFocus projector can project 1000 ANSI lumens of brightness, has a 1400:1 contrast ratio, and can show 16.7 million colors phrazle at the same time. The Faroudja DCDi FLI2300 processing chip powers the DLP projector, enabling for noise reduction, color and sharpness improvement, and scaling.

fieldpastoral's picture

While the contrast produced by the 7200 was adequate on my Stewart FireHawk screen, it was not as good as what the other HD2 geometry dash lite projectors we've seen. I like this feature of the device. Actually, each other parameter will have a clearly different sound quality.

X