Polk Monitor XT10 Subwoofer Review Test Bench

Test Bench
Peak Output Measurements Peak output was measured using a UMIK-2 along with REW. Amp volume was turned to max and all measurements were taken with the UMIK-2 facing down 90 degrees at exactly 1 foot from the center of the woofer placed in the middle of my room to minimize the room effect on the measurements.

The volume level from my pre/pro was increased in 10 dB increments until distortion occurred while playing a 10-300 Hz sine wave. From there, the volume was dropped in 1 dB increments until distortion was no longer present.


You can see the output rolloff begins just above 30 Hz.

ARTICLE CONTENTS

COMMENTS
lancyjanes's picture

Polk Audio was an early pioneer in the use of high-end materials and finishes for comparatively affordable audio equipment. Thank you
basketball starsgame

carewser's picture

I'm also a member of Bassaholics anonymous, I own 13 subwoofers (but only 11 are hooked up). 50 watts isn't a lot but for the price this one puts out decent bass

borus-amar's picture

Great review — I recently added the XT10 to my setup, and the bass response is exactly what I needed for movie nights. One thing that made a big difference was optimizing my streaming quality through my Verizon Fios router. Used the guide at https://fiosgateway.org/ to adjust QoS settings via MyFiosGateway — now everything runs smoother with zero lag during high-action scenes."

X