The towers were positioned about 4 feet out from the wall behind them and angled toward the center listening seat photo booth rental.
Monitor Audio Bronze 200 Surround Speaker System Review Test Bench
Test Bench
Using the Parts Express Omnimic measuring system, I conducted several in-room measurements, all taken at the single, seated ear-height position in my room. (Previous experience has shown that an average of several readings, taken across a span of about 2-3 feet, differs little from the single position apart from smoothing out small ripples.) For all the figures here, red is the left speaker, and blue the right speaker.—TJN
Fig.1 The responses of the left and right Monitor Audio Bronze 200 towers in-room with no subwoofers and no EQ.
Fig.2 The responses of the left and right Monitor Audio Bronze 200 towers in-room with no subwoofers and graphic EQ applied at 63Hz, 125Hz, and 250Hz.
Fig.3 The responses of the left and right Monitor Audio Bronze 200 towers in-room with two Monitor Audio W10 subwoofers set up as described in the review. (Graphic EQ applied to the Monitor Audio 200 towers at 125Hz and 250Hz.)
- Log in or register to post comments


To further minimize potential
Submitted by laopanaoma on March 26, 2024 - 1:05am
To further minimize potential colorations, the bass-midrange drivers' cones are likewise dished and do not have dust caps. See: https://www.nextsteppaintingpro.com/cabinet-painting-and-staining