Panasonic TC-P65VT60 3D Plasma HDTV Specs

Specs
Dimensions (W x H x D, inches): 60.3 x 35 x 2.0 (without stand); 60.3 x 38.4 x 12.8 (with stand)
Weight (pounds): 92.6 (without stand); 111.4 (with stand)
3D Glasses: 2 pair included, extras $80 each
Video Inputs: HDMI 1.4 (3), component video (1, shared), composite video (1, shared)
Audio Inputs: Stereo analog (1, shared)
Other: Antenna/cable, USB (3), Ethernet (1), SD card slot (1)
Audio Outputs: Optical digital (TosLink, 1, no multichannel passthrough), Audio Return Channel (ARC) on HDMI 2

Company Info
Panasonic
panasonic.com

COMMENTS
Samsuri's picture
Submitted by Samsuri on September 25, 2013 - 9:07pm

I recently bought a 55VT60 here in Singapore, while making changes to the settings I realise that the HDTV is missing some 2D and 3D setting options such professional2 for 2D and custom for 3D. These options are missing totally on my new HDTV therefore i am not able to have the same setting as given here. I do however have the others options. What settings do you recomend for my HDTV in this case, thank you.

acpryor's picture
Submitted by acpryor on October 31, 2013 - 1:24pm

Hey! I love these reviews, they're so helpful.

My AV installer is recommending I go with the LG 60PN5700:
http://www.lg.com/us/tvs/lg-60PN5700-plasma-tv

I was thinking of getting this Panasonic based on your reviews and I can't find a review of the LG. The Panny is more $, I can get the LG for $900. I don't know what to do since I can't see them side by side. This will be our primary TV in our family room, lots of windows with minimal light control during day.

Recommendations?

Andrew

globus's picture
Submitted by globus on March 22, 2014 - 6:56am

Hi there
I have a question regarding your W/B Detail adjustment
Obviously you are reffering to Panel Luminace Setting by splitting it on Mid and Hig but TV it self have option to set:
R Gain
G Gain
B Gain
R Cutoff
G Cutoff
B Cutoff
and in you settings you are giving only 1 number for each colour
W/B Detail Adjust. (2D)
Mid
Red –7
Green –1
Blue 14
Could you advise me how that should be set up?

Thanks
Sebastian

tailwhip's picture
Submitted by tailwhip on November 9, 2013 - 2:50am

If you go into the Settings part of the menu you can find the switch to unlock the isfccc mode. Once you do the Pro modes will show up in the Picture Settings menu, where you select THX ect.
Now you will see the additional adjustments.

globus's picture
Submitted by globus on March 22, 2014 - 7:04am

I also noticed that you are missing
Gamma Detail Adjustment
Input Signal Level
100 ?

Thanks

Visions's picture
Submitted by Visions on December 2, 2013 - 7:39pm

Hi there, thank you for a great review of the TV. It's spot on.

I'm a little confused about the listed settings could you explain to me.

Is the Mid and High referencing the high and low? on the tv the option goes first r/g/b high and r/g/b low, so I am not sure if I mixing up the two settings.

W/B Detail Adjust. (2D)
Mid High
Red –7 10
Green –1 4
Blue 14 –3

Are these the 3D settings, is 32D a typo? Same things I am not sure which is mid (high or low)

W/B Detail Adjust. (32D)
Mid High
Red –15 11
Green 0 0
Blue –6 –1

Given that I did possibly mixed up these settings completely I really like your adjustment. Thank you for posting it.

cooloregon's picture
Submitted by cooloregon on January 2, 2014 - 5:36pm

Mid = Low and High is High.

cooloregon's picture
Submitted by cooloregon on January 2, 2014 - 5:43pm

Thanks for your VT60 calibration post. I have one question though, where is the 100 IRE setting for the Input Signal Level? As it is also missing in the ZT60 calibration post also. I left mine at the default setting of -0-.

shield's picture
Submitted by shield on February 22, 2015 - 3:23pm

R Gain:10
G Gain:4
B Gain:-3
R Cutoff:-7
G Cutoff:-1
B Cutoff:14

If you say mid and high.if i use this settings then i have too much blue in the blacks where you can check with AVS HD709.so whats right.this or the other way around?

X