Ask S&V

Can I Run Wireless Headphones Simultaneously with TV Sound?

Al Griffin  |  Dec 30, 2014

Got a tech question for Sound & Vision? Email us at AskSandV@gmail.com

Q I am in the market for a new home theater receiver and have a dilemma. My wife is hearing impaired and has trouble hearing the TV sound. We have tried a few infrared wireless headphone solutions and have been very disappointed by the poor sound quality. I am looking for a system that will allow me to hook up a separate set of headphones to run simultaneously with the TV sound. Is this possible? —John Bott / via e-mail

A Depending on the capabilities of your receiver, it should be. Some receivers have a preamp out connection that provides a simultaneous stereo output you can route to a wireless headphone system. To do this, you may need to use some type of adapter—most likely stereo RCA-to-3.5mm mini. You may also be able to tap your receiver’s second-zone capabilities, though the input source options might be limited (some receivers only pass analog).

Since you’ve already checked out some of the cheap infrared headphones and found out how bad they can sound, it’s time to step up to a higher-quality option. Wireless headphone systems like Sennheiser’s RS 160 ($200) use Kleer technology to wirelessly transmit digital audio. Kleer uses lossless compression to preserve sound quality, and it’s generally immune from interference. And the RS 160 is a closed, around-ear design, so you shouldn’t hear any sound leaking from your wife’s ’phones when you’re sitting side by side in front of the TV.

COMMENTS
Ladyfingers's picture
Submitted by Ladyfingers on December 31, 2014 - 10:10am

You can use the TV's RCA audio outputs. Some TVs also have headphone sockets. The upshot is that they won't override the speakers like the receiver's heaphone socket.

hk2000's picture
Submitted by hk2000 on January 2, 2015 - 7:28am

If you're planning on a wireless headphone, since you're in the market for a receiver, just make sure it includes a pre-out which you can connect to the headphone transmitter, but if you're planning on using a wired headphone, then there is no easy way unless you use a headphone amp, because almost all devices with a headphone output will mute the speakers when a headphone is plugged into it

X