Sony BRAVIA XBR-52HX909 LCD 3D HDTV Settings


Unit-to-unit sample variations, the viewing environment, and the source might render these recommendations less than optimum. They are provided only as a potentially useful starting place.

The settings here that are most likely to translate reliably from one sample to another are those involving specific features with only a few setting options, such as Color Gamut, Gamma, and Noise Reduction. The ones most likely to be subject to sample variations are video controls offering a wide range of settings. This will be particularly true for color temperature, white balance, and color management adjustments (where available).

We strongly recommend that you find the optimum basic video settings for your sample by using one of the many display setup DVDs that are available, such as Digital Video Essentials (DVD) or DVE HD Basics (Blu-ray). A full calibration, particularly of the gray scale and color gamut, is best left to a trained and properly equipped technician such as those certified by the Imaging Science Foundation (ISF) or THX.

2D 3D
Scene Select General General
Picture Mode: Custom Custom
Backlight: 3 Max*
Picture: 75 Max
Brightness: 50 50
Color: 48 50
Hue: 0 0
Color Temperature: Warm 2 Warm 2
Sharpness: 50 50
Noise Reduction: Off Off
MPEG Noise
Reduction Off Off
Motionflow: Off Off*
CineMotion: Auto 1 Auto 1*
Advanced Settings
Black Corrector: Off or Low Off or Low
  Adv. Contrast Enhancer: Off Off
  Gamma: -1 0
  Auto Light Limiter: Off Off
  Clear White: Off Off
  Live Color: Off Off
  White Balance:
    Red Gain: 0 0
    Green Gain: -1 -4
    Blue Gain: -10 -5
    Red Bias: -5 +2
    Green Bias: 0 +1
    Blue Bias: +14 +3
  Detail Enhancer Off Off
  Edge Enhancer Off Off
  Skin Naturalizer Off* Off*
Ambient Light Sensor Off Off
Pro Picture Setup
  Color Matrix Default** Default**
  RGB Dynamic Range All Auto All Auto
  Power Saving Off Off

* Locked out ** ITU601 for 480i/p; ITU709 for 720p and 1080i/p

(877) 865-SONY

sovkiller's picture

It was fixed, can delete this post...