Ask S&V

Sort By:  Post Date TitlePublish Date
Ask S&V
Dinosaur TV
Scott Wilkinson  |  Jul 11, 2011  |  1 comments
I have an old 50-inch front-projection TV sold by Sears under the brand Proformance around 1984. The picture is still good overall, but small text such as a ticker at the bottom and sports scores are out of focus. Large text is okay. It seems like it needs to be re-focused and realigned on the screen, but I don't have a manual and neither does the Internet. I also don't want to put any tech money into this TV, so hopefully I can do the adjustment myself. Included in this message are pics of the TV and the problem along with the control panel. Is there anything I can do to correct these problems?

I found a link to a procedure to refocus a 3-CRT rear-projection TV, and I wonder if it will work from the front controls of my TV?

Donna

Continue Reading »
Ask S&V
Marantz AV7005 vs. Integra DHC-40.2
Scott Wilkinson  |  Jul 11, 2011  |  3 comments
I am planning to replace my preamp/processor, and I've been looking at the Marantz AV7005 and the Integra DHC-40.2. I've read both reviews on HomeTheater.com (linked here), but I would like your opinion about these two units, especially the differences in sound quality and video processing.

Eliot Marin

Continue Reading »
Ask S&V
Front vs. Rear Projection
Scott Wilkinson  |  Jul 07, 2011  |  3 comments
I've been thinking about building a theater room, and I'd like to know the relative benefits of front versus rear projection when using a video projector. As of right now, it appears that DLP is the best bet for projection, but I am sure that could change.

Grant

Continue Reading »
Ask S&V
Video Processing
Scott Wilkinson  |  Jul 07, 2011  |  0 comments
I have a Pioneer VSX-33 A/V receiver that outputs HDMI to an Epson 8700UB projector (seen here). How do I know which component is doing the video processing? When my Blu-ray player or satellite receiver runs through the AVR and out to the Epson, does the AVR do all the processing, or does the Epson's video processor? I guess I would prefer to have the Pioneer do all the video processing since its Marvell Qdeo chipset has been so favorably rated.

Dan Theis

Continue Reading »
Ask S&V
Plasma Buzz
Scott Wilkinson  |  Jul 06, 2011  |  4 comments
I bought a Panasonic TC-P50ST30 plasma TV (seen here), and I hear a slight buzz from where I sit if there is no sound playing. I read that this is normal for plasma technology. Is that true? Should I call Panasonic for a replacement?

Hunter Cvetko

Continue Reading »
Ask S&V
Equalizers and Tape Monitoring
Scott Wilkinson  |  Jul 06, 2011  |  2 comments
I've had a very old equalizer for about 25 years, and I would love to use it for listening to my tapes. To do so, however, I didn't know that the receiver needs a "tape monitor" capability, which most modern receivers don't have. Are there any equalizers that do not need tape monitoring?

Lafonte

Continue Reading »
Ask S&V
3D Obsolescence
Scott Wilkinson  |  Jul 05, 2011  |  11 comments
I'm thinking about getting a Samsung UN46D7000 with my tax return this year. That means I'll have to upgrade my A/V receiver and HDMI cables, plus I plan to get a 3D Blu-ray player since the PS3 doesn't do 3D Blu-ray as well as a dedicated player.

The thing is, all this gear is made for 1080p at 24 frames per second, but filmmakers like James Cameron and Peter Jackson are talking about 48 and 60fps. If I buy now, am I just going to have to buy a new system again next year, or will the standard stay viable at least long enough to get some value out of the current generation of gear?

Nik

Continue Reading »
Ask S&V
Streaming Audio to a Pre/Pro
Scott Wilkinson  |  Jul 01, 2011  |  0 comments
I just bought an Integra DHC 80.2 and want to stream music and movies from my HP laptop (or create a separate server) to it with a hard-wired Ethernet connection. However, I want the best possible sound. How can I do this?

Dale

Continue Reading »
Ask S&V
Compact Home-Theater Speakers
Scott Wilkinson  |  Jun 30, 2011  |  5 comments
I read in a recent Ask Scott post ("Building a System") that you thought full-range speakers in the system under discussion would be overkill for watching movies. One of the reasons for using bookshelf or compact speakers for the front left/right channels—tonal matching—was also highlighted as an appealing quality in Home Theater's review of B&W 805 compact speaker system (seen here).

I am looking to set up a surround system for the sole purpose of watching movies (no music) in a 12x12 room. As a general rule, do you recommend a system with matching front and surround speakers over a system with full-range fronts and compact surrounds, knowing there will be a sub either way? Most of the systems I see reviewed in magazines as well as all the recommended systems at my favorite local hi-fi store match large floorstanding front speakers with small surrounds, but your advice seems to contradict this.

Johann Dutton

Continue Reading »
Ask S&V
AVR Surround Modes
Scott Wilkinson  |  Jun 29, 2011  |  0 comments
I have a Harman Kardon AVR 146 5.1 receiver. Which surround mode (Dolby Digital, Dolby Pro Logic II, DTS, DTS Neo:6, or Logic 7) will provide the most enveloping sound without cranking up the surround speakers? I'm currently using Dolby Digital, and while the rear speakers are supposed to provide ambient sound, I find them lacking. I use a sound meter to set the Channel Adjust levels and a tape measure to determine the distance to the sweet spot for the Delay Adjust settings.

Brian Porter

Continue Reading »
Ask S&V
HDMI Audio Return Channel
Scott Wilkinson  |  Jun 29, 2011  |  2 comments
I have all my source devices (TiVo, Roku, Blu-ray player) connected to my Denon AVR-791 via HDMI 1.4a cables, and a single HDMI cable goes to my Panasonic TC-P50VT25 television. If I use the Internet apps on the TV, I cannot hear any sound. How should I set up the AVR and cables to get sound from the TV to my speakers? I have the onboard speakers disabled, of course, and if I turn them on, the sound does work. I don't know if the AVR can take audio back over the HDMI cable through the HDMI output port.

I ask because the Netflix app on the TV is pretty good. I thought the same version would be on the matching Panasonic 3D Blu-ray player, but it's not. Right now, we use the version on the TiVo or Roku.

Paul Wurster

Continue Reading »
Ask S&V
Hybrid Plasma?
Scott Wilkinson  |  Jun 28, 2011  |  4 comments
A salesman at a store I visited said the Samsung PN64D8000 is a hybrid plasma with LED backlighting, which makes it much better than the Panasonic plasmas. He says it has the brightness of LED and all the qualities of plasma. What is your opinion of this technology?

Joe Souders

Continue Reading »
Ask S&V
TV Shopping
Scott Wilkinson  |  Jun 27, 2011  |  0 comments
It's time to get rid of my Sony Wega 40-inch TV, which cost over $3000 when I bought it years ago. My local A/V retailer carries Sony, Samsung, LG, and Sharp, and a local furniture store offers Panasonic, Toshiba, and Hitachi. The most important features to me are sports, movies, and Ethernet (I have a lot of movies on my new Windows 7 PC).

Chris MacDonald

Continue Reading »
Ask S&V
Flat Panel Break In
Scott Wilkinson  |  Jun 24, 2011  |  4 comments
I heard you recommend "breaking in" a plasma TV for around 100 hours before calibrating it. Do you also recommend something similar for LED-illuminated LCD TVs?

Ronnie Klejka

Continue Reading »
Ask S&V
TV Recommendation, In-Ceiling Speakers, Panasonic or Samsung Plasma
Scott Wilkinson  |  Jun 23, 2011  |  2 comments
Which 46-inch non-plasma, non-3D TV do you recommend? Can I get in-ceiling speakers individually instead of in pairs? Should I get a Panasonic VT30 or Samsung D8000 plasma?
Continue Reading »

Pages

X