Fred Manteghian

Fred Manteghian  |  Sep 06, 2008  |  4 comments

The good news is, owners of the Theta Casablanca can finally get HDMI switching capability (4-in / 1-out). The price? $4,000 <i>provided</i> you're at Casablanca 3 level. To get there from my original Casablanca would add between $3K-$4k to that price. How bad do you want it?

Fred Manteghian  |  Sep 06, 2008  |  0 comments

The $2,799 flagship receiver from HK has all the right buzz words going for it, including Faroudja DCDi video processing and scaling to 1080p, Dolby Volume, in-receiver decoding of Dolby TrueHD and dts-HD MA, four HDMI inputs (only one output though), Internet radio and seven channels of 110 watts.

Fred Manteghian  |  Sep 06, 2008  |  0 comments

The Revel Ultima Voice 2 on it's equally Ultima Voice 2 Pedestal. Behind and to the left are Salon 2 and Studio 2 (smaller) as well. Not new, but still something to lust after.

Fred Manteghian  |  Sep 06, 2008  |  0 comments

These will set you back $3,000 a pair, but these three way speakers, with dual 6.5" Kelvar woofers, 5" midrange, Nautilus tube-loaded tweeter looks to be meant for serious theater duty. Available in gloss black, rosenut or wenge.

Fred Manteghian  |  Sep 06, 2008  |  0 comments

At the bottom left, the RSX-1560 is Rotel's new flagship receiver, putting out 100 watts into 7 channels at 8 ohms (200 watts at 4 ohms) using the same IcePower Class-D technology that worked so well in the RMB-1085 amp I just reviewed. Catching up to the competition, the receiver does in-AVR decoding of both Dolby TrueHD and dts-HD MA bitstreams. $2,599.

Fred Manteghian  |  Sep 06, 2008  |  0 comments

Now you can ISF calibrate each of the four HDMI inputs on Integra's new flagship DHC 9.9 pre-pro. Differences between your setup box, BD player and gaming machine can be leveled before hitting your display device. Prior to this, your choices were calibrate your device for the "best" of your sources., or calibrate them all in your display device and remember to switch between the memories manually (remember, they're hitting your display via a single HDMI cable), and that's only if your projector or flat screen had that many memories! Integra worked extensively with Joel Silver of the ISF to make sure this worked right and the DHC 9.9, as well Integra's two top AVRs, the DTR-9.9 and DTR-8.9, get this ISF capability and that elusive seal of approval.

Fred Manteghian  |  Sep 06, 2008  |  0 comments

Both the DTR-9.9 ($2,600) and DTR-8.9 ($2,000) offer the same ISFccc level internal processing found in the DHC-9.9 pre-pro along with a near identical feature set, minus the balanced outputs and with amplification. In the case of the flagship, DTR-9.9, that 7 channels that put out 145 watts into 8 ohm.

Fred Manteghian  |  Sep 05, 2008  |  Published: Sep 06, 2008  |  1 comments

Cool new device to hang your plasma. Four of these slip in, pop-up modern versions of a molly bolt will hold a 150 lbs of high definition plasma heaven. Cost is only $16 a pair, but they'll only sell to your dealer. So with labor, permits, taxes, that comes to /. . .

Pages

X