LATEST ADDITIONS

Mark Fleischmann  |  Sep 11, 2014
You're looking at a cutaway of the coaxial driver array that makes Pioneer Elite's Dolby Atmos enabled speakers special, in the hand of designer Andrew Jones. It has a one-inch textile tweeter nestling amid a four-inch aluminum woofer. With two of Jones' very substantial looking crossovers, this coaxial array lives on both the top and front of the Elite monitor and tower speakers, shooting Atmos height channels out of the top, and everything else out of the front in the usual manner. Models include the SP-EBS73 monitor ($749/pair), SP-EFS73 tower ($699/each), SP-EC73 center ($399), and SW-E10 sub ($599). Pioneer's Atmos demo, using the company's Class D powered SC-89 receiver ($3000), was the best Atmos demo we heard on the first day of the show, with not just strong height effects but an overall tonal balance that made even the most aggressive movie soundtracks a treat. Can't wait to review these. Pioneer also showed its $349 SP-SB02 Speaker Base, with pairs of front-firing tweeters and midbass drivers and bottom-firing bass drivers.
Bob Ankosko  |  Sep 11, 2014  |  First Published: Sep 12, 2014
Make it disappear is a common refrain in the aisles and corridors of CEDIA Expo 2014. Montreal-based Revolution Acoustics is doing just that with an “invisible audio” system that uses a patented multifunction transducer less than 3 inches in diameter to produce sound. Attach the SSP6 Multiducer to the inside or outside of a wall and it energizes the entire surface to create what the company calls “whole-room sweet spots.”
Mark Fleischmann  |  Sep 11, 2014
Listen Audio captured our attention by stating its intention to build the kind of product that "allows the listener to shut off from the world." One such product is the Diffuse, an absorptive panel that takes the form of a modular 2 x 2 foot panel in foam, vinyl, wood, or laminate finishes, starting at $90 for the foam version. It uses differing slot widths and a 3/4-inch air gap to increase bandwidth. It can zap high-frequency flutter echoes but operates down to low frequencies. Benefits: "More stage. The walls seem to push away." Listen also showed the Voice ($3995/each), an in-wall speaker with a 3.5-inch-thick enclosure, 3/4-inch-thick cabinet walls, coaxial drivers, and a 94dB sensitivity rating. It is designed "to compete with the highest-end freestanding two-channel speakers" while also satisfying multichannel and in-wall needs. Listen's Concierge service will dispatch one of its several acoustic design firm partners to the location. Once they determine the specs, the installer comes in and does his work, and then the engineers return to see how the installation worked out and assess the need for tweaks. This is a most impressive company.
Mark Fleischmann  |  Sep 11, 2014
Of the many cool things on display at the MSE booth, Phase Technology's little P3-35 amp ($330) was among the coolest. Feed its Toslink input with a two-channel Dolby Digital signal and it will convert it to three amp channels, just the thing for Phase Tech's Teatro passive three-channel soundbar, cropped out of the picture. Use the analog input and it converts to two channels of Dolby Pro Logic. Power output is 35 watts times three or 50 times two. It's also got Bluetooth and learns TV remote volume commands. Phase Tech also showed its refreshed CI in-wall and in-ceiling lines, which include the CI7.3 X, a three-way eight-inch in-ceiling speaker for $375/each. The PC60 is a 30th-anniversary celebration of a classic monitor with new crossover and drivers including the flat-diaphragm woofer. Then there's the Rockustics X1-PowerRock ($700), the first horn-loaded rock speaker.
Bob Ankosko  |  Sep 11, 2014
Sonance has set out to change the way installers think about in-ceiling speakers with the new Discreet Opening System it introduced at CEDIA 2014. “We’re trying to get our dealers to think more about in-ceiling speaker systems for music instead of just pairs of speakers,” explained Jay Lazzaro, director of sales.
Mark Fleischmann  |  Sep 11, 2014
Dynaudio's Xeo 6 provided some of the best sound we've heard at CEDIA 2014. The smallish powered three-way tower, triamplified with 50 watts per driver, has a wireless hub built into it that transmits lossless audio up to 53 meters. It handled well recorded vocals in a highly naturalistic manner. But it really showed its true colors with "Uranus" from Holst's The Planets, delivering vivid orchestral textures in a way only a truly great speaker can. It sells for $4300/pair. Dynaudio's Platinum tower ($17,500/pair) was operating in the nearby Wolf Cinema booth and also sounded great.
Mark Fleischmann  |  Sep 11, 2014
Definitive Technology's Dolby Atmos demo sounded excellent, with the A60 elevation speaker ($499/pair) plugged into the top of the BP8060ST powered tower ($1998/pair). The height effects were good, the midrange was well dialed in, and the powered tower's bass was awesome. Why, then, are we running a picture of The Borg? It's actually part of Def Tech's new line of products built on the DTS Play-Fi wireless platform. You're looking at the W7 powered speaker ($399). It joins the W8 powered speaker ($699), the rack-mountable W Adapt ($399), the W Amp ($499), and the W Studio soundbar ($1299). The beauty of Play-Fi is that it's not limited, Apple-style, to a single manufacturer. There will be more Play-Fi products from the likes of Polk, McIntosh, Paradigm, and MartinLogan. Oh, and Def Tech plans to provide 24-7 tech support for its Play-Fi products. Play-Fi is going to be huge. Resistance is futile.
Bob Ankosko  |  Sep 11, 2014
Amid the aisles and aisles of home automation systems and wholehouse audio/video equipment at CEDIA 2014 is a tiny booth manned by Canadian startup Mass Fidelity. The focal point is a battery-powered Bluetooth speaker that delivers surprisingly robust and spacious sound from a box that can sit in the palm of your hand. It’s called The Core and it is most definitely not your everyday Bluetooth speaker.
Darryl Wilkinson  |  Sep 11, 2014
Although OmniMount is perhaps most well-known for making mounts and accessories designed for hanging large flat screen TVs on the wall and projectors on the ceiling, the company showed a new, slightly smaller mounting product in the booth at CEDIA. The new device, Stand for iPad, is an adjustable stand for iPads (with another version for iPad Air devices) that has three attachment and usage options: 1) as a desktop stand; 2) as an under-cabinet mount; and 3) as a wall-mount bracket. The new Stand for iPad folds flat for transporting or for hiding under cabinets when not in use as a convenient iPad holder above a countertop. The bracket uses a magnet built into the protective Case for iPad (included in the package) to securely hold it against the mount while allowing the iPad to rotate with minimal effort or be removed easily from the mount. The Stand for iPad will have an MSRP of $99.95 and is expected to be available in November.
Darryl Wilkinson  |  Sep 11, 2014
After pointing out that it was only two years ago when DISH first introduced the Hopper whole-home HD DVR, Vivek Khemka, DISH senior vice president of product management, announced the expansion of DISH’s program to further the integration of the Hopper with a number of additional home automation systems. “We are allowing unprecedented access to the DISH API,” Kemka explained. With access to the API, third-party automation system programmers will be able to provide seamless control of the Hopper within the confines of the smart home’s controller rather than forcing the homeowner to use two remote controls or apps, often with two dramatically different user interfaces.

The list of new automation partners announced by DISH includes...

Pages

X