Tom Norton

Sort By: Post Date | Title | Publish Date
Tom Norton  |  Sep 10, 2011  |  0 comments
Not much information was available on this Elite NP-M50 streaming device, but at $700, with an asynchronous DAC, it should be a hot ticket. A similar NP-M30 deletes some capabilities, including the asynchronicity in its DAC, will go for for $500. December availability for both.
Tom Norton  |  Sep 10, 2011  |  0 comments
This projector mount from Chief ($189) was not in the full-line catalog available at the show, but looks husky enough to handle many home theater projector. It might be useful for those who want their projector mounted high but don't want to hang it from the ceiling, Instead, it's mounted to the rear wall. But since in this case the projector will be mounted near the rear wall, you must be sure that the projector is compatible with the throw distance to your screen.
Tom Norton  |  Sep 10, 2011  |  0 comments
Draper is a major screen manufacturer but doesn't get a lot of play in the press. The small 2.35:1 screen shown here is curved, though that's not easy to spot in the photos. Draper can make any of its fixed screen sizes in a curved configuration for about a 50% premium over a comparable fixed screen. If that sounds like a lot, check out the competition from manufacturers who have grabbed more ink.
Tom Norton  |  Sep 10, 2011  |  0 comments
You can pay thousands for a good screen, or paint your own for the low hundreds. Screen Goo Americas (probably the company with the most memorable name in the business) offers four flavors: Reference White (roughly unity gain) HIgh Contrast, Max Contrast, and Ultra Silver 3D (high gain, preserves light polarity). All of them may be rolled or sprayed on an appropriate flat, smooth surface. The even make a screen paint for rear projection! It's also said to be flexible enough that the screen can be moderately curved after painting. We're not saying that it can equal a professionally produced screen, but the demo we saw looked mighty impressive. If the cost of a screen is keeping you from acquiring a projection system, this approach might well help.
Tom Norton  |  Sep 10, 2011  |  0 comments
Most recliners have a high back, which can interfere with the audio your ears receive. My long-term HT seats have long had this problem, which I minimize by using a different chair for serious music listening. It's hard to find a low-backed recliner, but the Axis model from Canada-based Palliser might be just the ticket. The rear headrest can be extended when you're in a more laid-back (literally) than critical mood. At roughly $2000 per seat (with power reclining and various shades of leather, straight and curved multi-seat configurations available), if they seem expensive, you haven't priced many premium HT seats. They're manufactured in Canada and Mexico.
Tom Norton  |  Sep 10, 2011  |  0 comments
We showed the $400 PSB M4U 2 headphones in an earlier pose. Here they're worn by PSB chief Paul Barton. They're not only highly effective at noise cancellation (Barton claims about 18dB below 1kHz)) but sounded exceptional. The detachable chord can be attached to either side, and the phones will work for audio even with the batteries discharged. They will be available in December
Tom Norton  |  Sep 10, 2011  |  0 comments
I reviewed the Aragon 8008 amplifier for Stereophile back in the mid-'90s and loved it. I often wished I'd bought it, in fact, as it was a near perfect match for my Energy Veritas v2.8 speakers. When Mondial (the original source company) folded, the Aragon line (and the lower end but also well-regarded Acurus products) was acquired by Klipsch. That company never really supported either of these lines. The rights were recently acquired by a company called Indy Audio Labs, which has just re-launched the 2-, 5-, and 7-channel Acurus amplifiers (200w/ch intro 8 ohms, all).

Later this year Indy plans to re-introduce the Aragon 8008 mkIII, 2-channels at 200W/ch (8 ohms) at $4000 and the Iridium, a 400W (8 ohms) differential monoblock, successor to the Aragon Palladium, at $4000 each. Apart from some added control and status features, the amps are said to be nearly identical in design to the earlier versions, though to my recollection the original Palladium was lower powered (but biased heavily toward Class A). And, of course, those 1990s models were considerably cheaper. Time marches on.

Tom Norton  |  Sep 10, 2011  |  0 comments
KEF's new R-series, mentioned in an earlier blog, was inspired by KEF's far pricier Blade ($30,000/pair), shown here in its dress whites. It sounded surprisingly good on the open show floor, with a tight, punchy bass that was undoubtedly helped by the lack of room modes--though the latter can hardly be blamed on any speaker. When I placed by hand on the composite cabinet during those heavy kick-drum hits, I felt practically nothing.
Tom Norton  |  Sep 10, 2011  |  0 comments
Kaleidescape's CD/DVD/Blu-ray server gets around the copy protection issue with Blu-rays by having the user load his or her Blu-rays into this carousel-like unit--the Vault. The discs are then loaded onto hard drive servers and played from there. But they will only play from the server if the unit confirms that they are still in the Vault. If not, the server will no longer play the disc file. That's not a limitation with CDs or DVDs, which can also be loaded into the Vault, but can be removed (but still play) after copying onto the hard drives. The Vault holds over 300 discs, but the number of Blu-rays you can load will depend on how big a server you purchase. No word on whether the pretty blue light is standard or just a show special.
Tom Norton  |  Sep 09, 2011  |  0 comments
Vivitek D8300, ceiling mounted.

Pages

X