CES 2012

Sort By: Post DateTitle Publish Date
Barb Gonzalez  |  Jan 12, 2012  |  0 comments
Myspace CEO Tim Vanderhook, and co-owner, Justin Timberlake announced Myspace TV at the Panasonic CES press conference. Available on Panasonic TVs as part of VIERA Connect on their next generation of Smart VIERA TV HDTVs, Myspace TV allows users to share and comment on the TV shows that they’re viewing.

Vanderhook began by explaining,“Historically, TV has been a shared experience, as people gathered together to watch their favorite programs.” Viewers can make comments on programming creating a group conversation that will show up on their friends’ Myspace TV.

Tom Norton  |  Jan 12, 2012  |  0 comments
Two years ago I prodded for a new Thiel center channel to match the company's flagship CS3.7 speaker. Now it's here—or will be later this year. The MCS1.2 uses the same coaxial midrange-tweeter driver as the CS3.7, along with a pair of smaller, newly developed woofers. In addition to use with the CS3.7s, the MCS1.2 can also be used as left and right front speakers and/or surrounds. Pricing TBD.
Tom Norton  |  Jan 12, 2012  |  0 comments
In an adjoining room, Thiel was demonstrating the new CS1.7 (estimate $5500/pair, available early in 2012), a replacement for the well-received CS1.6. They use the same woofers as the MCS1.2, below, and sounded superb driven by Bryston electronics. But I might add that Thiel has used this same room for the last three CESs, and it hasn't produced anything short of audio magic there yet.
Tom Norton  |  Jan 12, 2012  |  0 comments
Thiel Audio is ready to restore any of their speakers you might have on hand, or find in a garage sale or Aunt Minnie's attic. Like this 1970s vintage pair of CS1.2s, for example.
Tom Norton  |  Jan 12, 2012  |  0 comments
Good things come in threes, and in this case it's Parasound's new three-channel Halo A31 amplifier ($3000, available soon). It's essentially a three-channel version of Parasound's highly-regarded Halo A21 stereo amp, and a cousin to the company's Halo A51 five-channel design. Why would you want a three-channel amp? To locate your front channel amps up front and your surround amps in the rear where they can benefit from shorter cable runs to the surround speakers. Or perhaps you don't need as much power in back, or already have a decent stereo amp you can use there.
 |  Jan 12, 2012  |  0 comments
TAD was again showing its high-end speakers and electronics. But there's been a new delivery to the family, the E1 floorstander (the smaller of the two shown in the picture). For TAD, it's now the company's "entry level" consumer mode. Like all TAD speakers, it exhibited a tremendous dynamic range—which you should expect for those bucks but don't always get.
Tom Norton  |  Jan 12, 2012  |  0 comments
Funny, it looks a lot younger with the introduction of a new integrated amp, a CD/SACD player, DAC, and preamp. All of them are 2-channel only, of course. The first three are expected to come in at $10,000 or under when they appear in mid-2012. The preamp, however, will set you back $25,000. All four offer a full complement of digital inputs (including asynchronous USB). The preamp and integrated amp also have analog inputs. The player has external digital inputs, and both it and the DAC have volume controls and may be used as digital preamps for direct connection to your power amps.
Tom Norton  |  Jan 12, 2012  |  0 comments
Energy has long been one of my favorite speaker companies, not least because of my long term reference Energy Veritas v2.8 speakers, circa 1994 (an eon for an audiophile to favor anything). But the brand has fallen on hard times since its acquisition (along with Mirage) by the Klipsch Group. Hopefully better days are ahead. There are, apparently, some new Veritas models in the lineup, but you'd never know it from Klipsch's CES kiosk that features subwoofers and soundbars.
Tom Norton  |  Jan 13, 2012  |  First Published: Jan 12, 2012  |  0 comments
Like most cable manufacturers these days, Kimber Kable's top speaker cables sell at "If you have to ask" prices. Shown here is how they are internally constructed, which looks like a braided mesh of cables over a flexible inner core.
Tom Norton  |  Jan 11, 2012  |  0 comments
Later at the show we obtained more details about Panasonic’s 2012 sets. New models in the VT50, GT50, and ST50 series of plasma sets will make up the meat and potatoes of Panasonic’s updated designs, expect to be available in 2-3 months if past delivery schedules are maintained. There will be an expanded range of new Panasonic LCD IPS designs as well. In fact, there are 15 new LCD models, 13 with LED backlighting. Seven of the LCD sets are 3D, including three in the ET5 series using passive glasses—Panasonic’s first departure from full HD 3D (passive glasses sets cut the vertical resolution seen by each eye in half in a 1080p set). In addition, the LCD line now includes 47- and 55-inch sizes. Previous Panasonic sets at 42-inches and larger have all been plasma designs. With LCD now dominant in the market, could Panasonic be hedging its bets?
Tom Norton  |  Jan 11, 2012  |  0 comments
With Internet connectivity, you can now play competitive video games over the Web. How long before such games become championship spectator sports we can watch passively on HDTV, bringing us full circle? With 300 channels, maybe they have already and I’ve just missed it.
Tom Norton  |  Jan 11, 2012  |  0 comments
At its press event Monday before the main show floor opened, Panasonic was almost silent on the performance details of its new sets (none of the big manufacturers were making a big deal about improved picture quality, though if pressed they will admit to evolutionary improvements in their new 1920 x 1080 models). But Panasonic was big on improved convergence. We certainly aim to find out in our reviews when the new sets become available.

90% of the Panasonic’s 2012 models offer Web connectivity, which is clearly the main theme song of this year’s CES. At the press event Panasonic also announced a working agreement between Panasonic and MySpace (!?) for enhanced social network connectivity, such as texting with your friends while you all watch the same movie. I can see this for sports, but for films? And can this joint effort resurrect a moribund social networking service that has clearly lost its trench war with Facebook? Panasonic and MySpace certainly hope so; they even trotted out celebrity Justin Timberlake at the press event to help promote this new launch. Timberlake co-starred in a recent movie about the origin of Facebook; now he’s helping to (possibly) reinvigorate MySpace.

Tom Norton  |  Jan 11, 2012  |  0 comments
Toshiba was showing its latest prototypes of glasses free 3D. In comparison to last year's demos, the results were much improved. The secret appears to be the use of a 4K LCD panel, which ups the convergence available to each eye—much like the new, jumbo 4K set shown by LG appears to improve the (passive glasses) 3D performance of that set. If you’re watching 3D alone, the set tracks your head position and adjusts the picture to provide optimum performance. In a group showing, the 3D works properly only in 9 individual regions across the front viewing area. A small circular bug at the top center of the screen (visible in the photo) tells you if your head is in a hot spot for 3D. Toshiba expects to have sets in stores in late 2012. But the use of a 4K panel suggests that the first such sets will be expensive, so I wouldn't hold off purchasing a 3D set hoping to have a cheap, glasses-free alternative real soon now.
Tom Norton  |  Jan 11, 2012  |  0 comments
Toshiba demonstrated how a 4K panel can improve the resolution. The photo above can't do it justice, of course (the 4K panel is on the left), but you could clearly see the difference on some material. Of course, the images were stationary of moving very slowly; motion would likely degrade any resolution improvement.
Tom Norton  |  Jan 11, 2012  |  0 comments
The Smart Crystal Pro polarization modulator from a new (to us) company called Volfoni (which also makes both active and passive 3D glasses) can take your single chip active glasses DLP 3D projector and turn it into a passive glasses 3D projector. The brochure says it can do this for any 3D single lens projector, but the device has only been verified effective on DLPs.

What it does, in effect, is to substitute rapidly alternating polarization of the filter, which is positioned in front of the lens, for the switching of active glasses. You'll need a connection from the sync transmitter output in the projector to the Crystal Pro to make this work, or alternately DLP Link in the projector (DLP Link is a process that uses rapid interframe bursts of light from the DLP projector that normally triggers active glasses). (If your projector has neither, that is, no DLP Link and an on-board sync transmitter, it will not work, as I understand it. You'll also need a screen that preserves polarization. Estimated cost will be $1500 for the Crystal Pro itself, or $2000 for a package including both the Crystal Pro and a slide that can automatically move the polarizer out of the way for 2D material.

Pages

X