Shop SoundAndVision
Refine By

Samlex

  • Sort By:
Samlex

This modular 19" rack mount AC/DC power supply can provide up-to 60 Amps continuous power. The output DC voltage is highly regulat...ed at 13.8 Volts (105-125 Volts, 50/60 Hz AC input). Output power can be expanded in steps of 20 amps (up-to 100 Amps max.). An external battery can be connected for back-up and a section of the output current (up-to 8 amps) is diverted to charge the batteries when in state of discharge using the in-built battery back-up module. The battery supplies the DC load on loss of utility power. Features include N+1 redundancy, front panel analog Volt/Ampere Meter display, remote monitoring and indication by 25-pin D-sub connector, fan failure warning and alarm indication. Ideal for critical power supply applications, telecommunication systems, mobile sound/audio displays, GPS receivers, security systems, CCTV systems. read more

Samlex

Samlex IDC-200A-12 Fully Isolated 200 Watts DC-DC Step Up Converter, Provides a highly regulated output DC voltage of 12.5 Volts f...or an input DC voltage range of 9-18 Volts and rated output current of 16 Amps IDC-200 series is a complete line of high efficiency 200 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-200A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 16 Amps (at 18 Volts input). Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with " push-on flat blade "quick disconnect" connectors. IDC-200A-12 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI), EN50082-1 (for EMC) and the European Automotive Directive 95/54/CE. Key Features Fully isolated Short circuit protected Current limited Specifications Input Voltage Range: 9-18 VDC Output Voltage: 12.5 VDC Output Current: 16A Input To Output Isolation: Yes > 400V RMS Output Ripple & Noise: < 50 mV RMS Peak Efficiency: 85% Cooling: By temperature controlled fan Operating Temperature: -20C to +30C, De-rate linearly to zero at 70C Humidity (Non-condensing): Max 95% External Input Side Fuse (Inline with "input +" terminal): 32V, 30A External Output Side Fuse (Inline with "output +" terminal): 32V, 20A Input Wire (Up to 6 ft): AWG #6 Output Wire (Up to 10 ft): AWG #6 Dimensions: 6.9" x 3.5" x 1.9" Weight: 1.4 lbs read more

Samlex

Fully Isolated Short Circuit Protected Current Limited 2 Year Warranty CE Approved

Samlex

Samlex IDC-100C-24 Fully Isolated 100 Watts DC-DC Step Up Converter, Provides a highly regulated output DC voltage of 24.5 Volts f...or an input DC voltage range of 30-60 Volts and rated output current of 4 Amps IDC-100 series is a complete line of high efficiency 100 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-100C-24 isolated DC-DC converter provides a highly regulated output DC voltage of 24.5 Volts for an input DC voltage range of 30-60 Volts and rated output current of 4 Amps (at 60 Volts input). Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with " push-on flat blade "quick disconnect" connectors. IDC-100C-24 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI) and EN50082-1 (for EMC). Key Features Fully isolated Short circuit protected Current limited Specifications Input Voltage Range: 30 -60 VDC Output Voltage: 24.5 VDC Output Current: 4A Input To Output Isolation: Yes > 400V RMS Output Ripple & Noise: < 50 mV RMS Peak Efficiency: 85% Cooling: By temperature controlled fan Operating Temperature: -20C to +30C, De-rate linearly to zero at 70C Humidity (Non-condensing): Max 95% External Input Side Fuse (Inline with "input +" terminal): 80V, 5A External Output Side Fuse (Inline with "output +" terminal): 32V, 5A Input Wire (Up to 6 ft): AWG #14 Output Wire (Up to 10 ft): AWG #12 Dimensions: 5.9" x 3.5" x 1.9" Weight: 1.2 lbs read more

Samlex

This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to... a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 60 Amps. The SDC-60 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, reverse polarity and over-voltage protection. read more

Samlex

Max 2500W Inverter Install Kit:Kit Contains: (1) 300A fuse assembly (includes fuse),(1) 10 Ft AWG# 2\0 Positive Cable, (1) 10 Ft A...WG# 2\0 Negative Cable read more

Samlex

http://www.amazon.com/dp/B0073I3ODW/ref=asc_df_B0073I3ODW5241477/?tag=INSERT_TAG_HERE&amp;creative=394997&amp;creativeASIN=B0073I3...ODW&amp;linkCode=df0 read more

Samlex

Max 3500W Inverter Install Kit:Kit Contains: (1) 400A fuse block, (1) 10 Ft AWG# 4 \0 Positive Cable, (1) 10 Ft AWG# 4 \0 Negative... Cable read more

Samlex

Specifications. Dimensions: 3.5 x 3.9 x 1.9. Applications. Industrial. Commercial. OEM. Recreational. Marine. Design Features. Ste...p up from 12VDC to 24VDC. Switch Mode design. CE approved. High Efficiency. Over-current protection. Over-voltage, reverse connected diode across input read more

Samlex

Samlex 30A Switching Power Supply - No Meters This high efficiency UL-60950-1 approved AC-DC power converter provides a highly reg...ulated output DC voltage of 13.8 Volts at 30 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz possible models also available). These advanced switch-mode DC power supplies were designed specifically for land mobile radio applications. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit, and over-temperature protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device. read more

Samlex

Samlex IDC-360C-24 Fully Isolated 360 Watts DC-DC Converter, Provides a highly regulated output DC voltage of 24.5 Volts for an in...put DC voltage range of 30-60 Volts and rated output current of 15 Amps IDC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360C-24 isolated DC-DC converter provides a highly regulated output DC voltage of 24.5 Volts for an input DC voltage range of 30-60 Volts and rated output current of 15 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with " push-on flat blade "quick disconnect" connectors. IDC-360C-24 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI), EN50082-1 (for EMC). Key Features Fully isolated Short circuit protected Current limited Specifications Input Voltage Range: 30-60 VDC Output Voltage: 24.5 VDC Output Current: 15A Input To Output Isolation: ? 400V RMS Output Ripple & Noise: < 50 mV RMS Peak Efficiency: ? 85% Cooling: By temperature controlled fan Operating Temperature: -20C / -4F to +30C / 86F (De-rate output current linearly to 0A at 70C / 158F) Humidity (Non-condensing): Max 95% External Input Side Fuse (Inline with "input +" terminal): 80V, 20A External Output Side Fuse (Inline with "output +" terminal): 32V, 15A Dimensions: 5.23" x 7.5" x 3.27" Weight: 3.1 lbs read more

Samlex

Power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W. Completely electron...ically protected circuit board. With LED user interface it is easy to check the battery state of charge. Large terminals. Works on PWM as low loss series controller. 5.7 in. L x 3.8 in. W x 0.94 in. H (1 lbs.). The Solsum F Series continues the huge success of one of the most used SHS controllers. read more

Samlex

DC-FA-200 Fuse Assembly, 200 Amps, Package Includes:(1) Single Pole Fuse Bar, (1) 200 Amp Fuse, (1) Insulating Cap, (1) Nut, (2) W...ashers read more