Settings

Unit-to-unit sample variations, the viewing environment, and the source might render these settings less than optimum. We strongly recommend that you confirm the results on your sample by using a good display setup DVD to get as close as possible to an optimum picture short of a full calibration. The latter should involve both color temperature (White Balance) and Color Space, and is best left to a trained and properly equipped technician, such as those certified by the Imaging Science Foundation (ISF).

Given those unit-to-unit sample variations, it's very possible that the settings given below for White Balance and Color Space may be no more accurate on a given sample of the set than the factory Warm2 Color Tone and Auto Color Space settings. Only a full calibration can insure that they will be spot-on.

Samsung has also redesigned its Service menu to make it far more usable and calibrator-friendly than before. While the settings in the user menu can be used to perform a full calibration, making these adjustments in the Service menu instead means that the user settings, in their reset positions, will be correctly calibrated. If the calibration is done only in the user menus, however, any change to the user settings will alter the calibrated results (which is why it's always good advice to write down all of your preferred settings and put them in a safe place).

Mode: Movie
Contrast: 85
Brightness: 52
Sharpness: 0
Color: 47
Tint: R49/G51
Color Tone: Warm2
Size: Just Scan (16:9 for 720p component and all 480i and 480p sources)
Digital NR: Off
DNIe: N/A in Movie Mode
Black Adjust: Off
Dynamic Contrast: Off
Gamma: -3 or -2 (program dependent)
Color Space: Auto (Custom if calibrated)
While Balance:

• Offset: Red 26, Green 27, Blue 25
  
• Gain: Red 25, Green 22, Blue 37
  

Custom Color Space:

• Red: Red 30, Green 0, Blue 6
  
• Green: Red 41, Green 50, Blue 24
  
• Blue: Red 0, Green 0, Blue 50
  
• Yellow: Red 54, Green 52, Blue 19
  
• Cyan: Red 30, Green 58, Blue 56
  
• Magenta: Red 50, Green 0, Blue 64
  

Flesh Tone: Off
Edge Enhancement: Off
xvYCC: Off
Film Mode: Auto
HDMI Black Level: Low