Panasonic SA-XR70 Digital Surround Receiver
At first glance, the SA-XR70's diminutive size and pretty face might encourage you to take it less than seriously. But that would be a mistake. It delivers 100 watts each to six channels, and it offers 6.1-channel Dolby Digital EX and DTS-ES decoding as well as Dolby Pro Logic IIx and DTS Neo:6 processing for upgrading stereo and other sources. It's also one of the first receivers to offer the hot new High Definition Multimedia Interface (HDMI), which means that instead of running a bunch of cables for the audio and video connections from a DVD player, you could use only one. The small, rectangular HDMI digital connector can deliver images up to 1080p resolution plus six-channel sound. I have two things to say about that: 1) Sweet. 2) It's about time.
SETUP Given a spiffy new fully digital receiver, it only made sense to mate it with a correspondingly spiffy DVD player. So I selected a Panasonic DVD-S97 for the job. This slim player has all the bells and whistles I could want (like Faroudja upconversion to 720p/1080i) and, most important, sports an HDMI output. With two HDMI cables (one comes with the player, none with the receiver), I was able to quickly connect player to receiver and receiver to a 50-inch, HDMI-equipped Sam-sung HDTV.
Plugging in the HDMI cables, I checked out the SA-XR70's rear panel. I expected it to be pretty bare, because HDMI makes everything simple, right? Instead, it was jam-packed with RCA jacks and other analog and digital connectors, which is good because it lets you hook up all your "old-fashioned," non-HDMI gear.
On the downside, the onscreen displays are sent only to the composite-video output. Not a big deal - the menu is pretty sparse to begin with and mainly provides access to one-time setup choices. A more serious deficiency is that composite- and S-video input sources aren't upconverted to component-video or HDMI format. What goes in is what comes out, through the corresponding connector. That defeats the elegance of HDMI, because you'll still need to run wires to your TV for non-HDMI sources. It also means you'll need to keep your TV's source-selection button handy to switch inputs.