Sony STR-DN1060 A/V Receiver Review


Audio Performance
Video Performance
Features
Ergonomics
Value
PRICE $600

AT A GLANCE
Plus
Wi-Fi, AirPlay, Bluetooth
MHL on front and rear
Google Cast, Spotify Connect
Minus
Confusing A.F.D., HD-D.C.S. terminology

THE VERDICT
If you can do without Dolby Atmos in this seven-channel AVR, Sony’s well-thought-out wireless functionality and sweet, golden sound are an unbeatable combination.

Let me say this up front: The Sony STR-DN1060 doesn’t do Dolby Atmos. Whether this is a serious omission in a seven-channel receiver today is debatable—but I’d say not. Most of the first-generation Atmos receivers have shortcomings of their own. For one thing, they lack the forthcoming DTS:X, the other flavor of object-oriented, height-enabled surround sound. More critically, seven-channel models can offer only Atmos 5.1.2, with two height channels in front or directly above the listener but none in back. That is at best a limited version of the Atmos experience because it doesn’t create the full dome-shaped soundfield of 5.1.4.

What the STR-DN1060 does have is built-in Wi-Fi, AirPlay, and Bluetooth—Sony’s now customary wireless triple threat. In fact, Sony pioneered what I call the wireless triple threat with the STR-DN1040 and -1050 at the prominent $600 price point, leaving other manufacturers to play catch-up as they replaced their extra-cost dongles with baked-in wireless capability. Let’s face it, Atmos fans: Wireless features have a far greater impact on the way music lovers access their digital music libraries than Atmos has on the way movie lovers enjoy surround sound. At least for the moment.

Atmos is an up-and-coming feature, no doubt about it. But Wi-Fi, AirPlay, and Bluetooth are here-and-now features. Let’s dry our tears and move on.

Triple Wireless Times Two
The STR-DN1060 is one of two new receivers in Sony’s regular (non-ES) receiver line. The other entry is the STR-DN860, which costs $100 less, has a little less power, and slims down the connectivity options—omitting component video entirely. Remarkably, however, the step-down model does include the same triple wireless capability. Sony is determined not to let any wireless-savvy consumers slip through their fingers.

Not much has changed ergonomically in this latest 10-series iteration, and that’s a good thing, because Sony nailed ease-of-use issues some time ago. The front panel continues its asymmetrical aesthetic, with volume and source knobs both at right, complemented by sliver buttons that access listening modes and zone controls. The remote remains a marvel of organization, with buttons differentiated by size, shape, color, and placement and unhampered by arcane clutter.

The graphic user interface, with its distinctive tall vertical panels, is still one of the most attractive ones out there. The five panels are Watch, which organizes A/V audio inputs into a separate screen; Listen, which does the same for audio-only inputs; Custom Preset, with combo settings for Movie, Music, Party, and Night; Sound Effects, or listening modes; and Setup. There’s also Google Cast, which allows you to play compatible music apps from your phone or tablet, and a SongPal remote app that allows operation of the receiver from an Android or iOS device.

Sony has omitted one of the three HDMI outputs present on the preceding model. However, there are still a half-dozen HDMI inputs, and they include both front- and back-panel MHL-compatible jacks for streaming from a smartphone. Another omission is AM radio, though there is still an antenna input for FM. (I’m always amazed when I unpack an AVR and find an AM antenna. What century is this?!)

In a departure from custom, Sony specifies power into 6 ohms, which results in a slightly higher power rating than the customary 8-ohm spec. That enables this model to be quoted at 100 watts with two channels driven. However, it’s also useful information if your speakers have a nominal impedance of 6 ohms. For a more complete picture, see our Test Bench measurements.

Some additional wireless features enrich the triple threat. One is Bluetooth transmission, which allows the AVR to send a signal to Bluetooth headphones for late-night listening. Yet another is Spotify Connect, which delivers the music-streaming service through a Wi-Fi-enabled app on your mobile device.

Sony’s DCAC (Digital Cinema Auto Calibration) is said to be newly improved. To my ears—or at least, functioning in my room—Sony’s room correction program has always seemed determined to do as little as possible. And really, isn’t “do no harm” the first rule of audio medicine? This caution even extended to speaker level settings, which DCAC set at zero for all channels except for a half-decibel cut on my typically overactive left surround channel and a conservative 1.5-dB cut for the subwoofer (versus the 3- to 4-dB cut normally appropriate in my room). My SPL meter typically takes a slightly more activist role, but I left Sony’s settings intact, except for a slight downward sub adjustment later in the game.

COMPANY INFO
Sony
(877) 865-7669
ARTICLE CONTENTS

COMMENTS
Fitzkirk's picture

"What I call the triple-threat..."

Threat: "a statement of an intention to inflict pain, injury, damage, or other hostile action on someone in retribution for something done or not done."

TREAT: an event or item that is out of the ordinary and gives great pleasure.

Having Wi-Fi, AirPlay, and Bluetooth would be a triple *treat*, as in the ice-cream, three flavors of goodness.

Having a triple *threat* receiver would make no sense. Every story you spell it this way. Why? What am I missing?

Now if you will excuse me I have to go shout at some clouds.

Mark Fleischmann's picture
Our readers are the greatest!
Fitzkirk's picture

Unless you are pronouncing "threat" as "threet", which is pretty fricking weird if you as me. And triple three would be 3 x 3 = 9 which also makes no sense. I await your response with great interest.

Mark Fleischmann's picture
Really, our readers are the greatest!
TimmyS's picture

Hey are all of your multi channel tests at one frequency or 20-20k full band? can you elucidate?

Rob Sabin's picture
Our audio technical editor Mark Peterson wrote a superb and detailed write-up explaining our audio test procedures a while back, which you can find here.

Here's an excerpt from the section describing the amplifier power test:

"Total harmonic distortion versus amplitude completes the set of tests. We quote power output at 0.1 percent and 1.0 percent distortion levels and measure with the left and right channels driving 8-ohm and then 4-ohm loads. For multichannel amps, we typically measure five channels driving 8-ohm loads and seven channels driving 8-ohm loads. All of these tests utilize continuous, in-phase, 1-kHz sine waves as a stimulus. Line voltage is adjusted to be no lower than 120 volts RMS at maximum amplifier power output."

palmharbor's picture

This is not the Sony of the 90's or 80's...this is just more Chinese gear with no quality control...unintuitive remote etc....I have two of their BluRay players and they are HORRIBLE....the remote is designed for a 5 year old's fingers and person with a degree in Computer Science. NEVER AGAIN

GB's picture

Your review gave the 1060 a 4.5 star rating for video performance - but, unless I missed it, you didn't mention video performance in your review?

Also, does the 1060 upscale or correct 480, 720, 1080i, etc.?

Thanks!

RSVM5's picture

Mark, great review. If HDR is important to me, do I need an AV with HDMI 2.0a interfaces?
Based on your review, I am leaning toward upgrading to this receiver, if it can do HDR. But the specs you say 2.0.

KSTinMB's picture

Hello.
I am considering the SONY STR-DN1060 to replace an earlier SONY AV Receiver, the STR-DN2010.
How do I connect a standard cassette deck, i.e. I need stereo audio in and out. (http://oi68.tinypic.com/69fbc0.jpg)
Thanks,
-stephen
Myrtle Beach SC

X