Balanced vs. Unbalanced Cables

Got a tech question for Sound & Vision? Email us at AskSandV@gmail.com.

Q I have a legacy AV receiver (Integra DTR-7) and am considering replacing it with a separate preamp/processor and amplifier. I’ve noticed that some preamps only have RCA outputs, while other, more expensive preamps also have balanced XLR outputs. Is there a noticeable difference in the sound quality when using balanced XLR cables versus unbalanced cables? The length of the cables needed to connect the two units would only be 1 meter. —Ed Mendelson / via e-mail

A The main reason you’d want to use balanced cables in an audio system is to prevent noise from being induced over long cable runs. With a balanced connection, the signal is conveyed from the source along two separate wires, with a third serving as a shield. (The signal is in phase on the first wire and phase-inverted on the second.) Any electromagnetic interference that the cable detects appears equally on each wire, and when the amplifier at the other end subtracts the two lines, it effectively cancels out the noise. In an unbalanced RCA-jack connection, there are only two wires—one to convey the signal, and a second to serve as a shield (and ground). The shield wire protects reasonably well against external noise, but some noise can still reach the audio signal, which could have audible effects. Having said all that, 1 meter is a short run—it’s highly unlikely that you’ll experience any noise issues. For that reason alone, I’d recommend saving money and going the unbalanced route for your new preamp/amp purchase.

COMMENTS
dmineard's picture

It made a difference on my system so buy good balanced cables.

MrSatyre's picture

Okay, now that we have that settled, I have a reference CD player from the early 90's that has UNbalanced XLR outs. What's the concept behind those? Is that the same as variable?

krell789's picture

Two reason's . 1) if you have a lot of equipment in your rack. Power cables are not shealded so you could have a lot of EMI and RFI surrounding your cables, noise could get into your system. 2) if you have a balanced amp you definitely want to go with a XLR, your system will sound a hole lot better.

X